2. X enon bulb lamp replacement process
2,5 Nm

A

Image2-15
11.Reinstall the side cover of the lamp house as illustrated.
Note: Please ensure that the thumb screws turning wires are ash with the cover or interference will occur while insertingthe
lamp house into the projector.
Image2-16

CAUTION:The“LAMP INFO” parameters which are stored on a chip inside thelamp house MUST be updated

aftereach installation of an xenon bulb lamp inside the lamp house. Neglecting this update will result in poor
performanceand short life time of the xenon bulb lamp. See procedure "Resetting the lamp parameters", page
20.
A realignment of the xenon bulb lamp inits reector is required after the installation of the xenon bulb lamp
in the lamp house. See procedure "Realignment of the lamp in its reector", page 21.
R59770175 XENONBULB LAMP REPLACEMENT 24/09/2008 17