2. Xeno nb ulb lamp replacement process
2.4 Installation of the lamp house
WARNING:This proceduremay only be performed by qualified technical service personnel.
CAUTION:Due to its high internal pressure, the lamp may explode in either hot or coldst atesif improperly
handled.
Necessary tools
7mmflat screw driver.
How to install the lamp house of the projector ?
1. E nsure thep rojectoris switched off.
2. R emove the lamp cover.
3. Hold fast the lamp house by its handles and gently slide the lamp house into its socket. Note that the compartment is provided
with guides (G) to position the lamp house correctly.
G
C
Image2-17
4. Push the lamp house forward until it slides fully into the projector.
5. Secure the correct position of the lamp house by tightening all three spring lockscrews as illustrated.
Image2-18
6. R einstallthe lamp cover of the projector.
18 R59770175 XENONBULB LAMP REPLACEMENT 24/09/2008