8. Image Menu
Enabling/disabling the filmmode detection
1. Press MENU to activate the menu bar.
2. Press →to select the Image item. (image 8-33)
3. Press ↓to pull down the Image menu.
4. Use ↑or ↓to select Filmmode detection.
5. Press →to pull down the menu.
6. Use ↓or ↑to enable or disable the Filmmode detection.
7. Press ENTER.
A white bullet shows the active setting.
Image8-33
8.9 BlankingWhat can be done ?
Blankingadjustments affect only the edges of the projected image and are used to frame the projected image on the screen and to
hideor black out unwante dinformation (or noise). A’0’ indicates no blanking.
Which blanking adjustments are available ?
• top blanking
• bottom blanking
• right blanking
• left blanking
R5976816 RLMR6+ PERFORMER 02/06/2006 81