Configuration Setup
Configuration Setup
Remote Mode
Performing Remote Control of the projector
The connection of the Rugged Remote Control to a projector uses a standard twisted pair cable with XLR connectors at each extremity (not supplied).
The baudrate is fixed at 57600 baud.
Image 1 gives an example of a Remote Control connected to a G5 SLM Projector.
Image 1
How to Connect
1.Plug the cable in the Remote connector labeled CTRL3 "Two way hardwired remote".
2.Plug the other extremity in the projector connector with the same label.
Remark: In case of a 6000 series LCD projector XLR remote control is not implemeted. Refer to "RS232RS422 communication" (page 20) to control the projector.
18
