Operation | ○ The Beckett 7600WTM can help to | |
|
| achieve even greater fuel savings over the |
○ The Beckett 7600AWM (AquaSmart | base AquaSmart with the following | |
advanced features: | ||
| Wireless Module) dynamically adjusts the | a. Warm Weather Shutdown can be |
| boiler high setpoint using the graph shown | |
| in Figure 1 and inputs of the outdoor | enabled to turn the low limit (if used) off |
| temperature and | if the outdoor temperature is above |
| setpoints as noted in the figure. | 70°F. |
○ The WTM algorithm overrides the | b. The boost function can be adjusted in | |
| HeatManagerTM functionality of the base | |
| AquaSmart when enabled. If the outdoor | small increments to prevent the reset |
| algorithm from being overridden too | |
| sensor battery is depleted or if the sensor | |
| quickly, which can benefit systems with | |
| stops working for any reason, the AWM will | |
| high water mass (such as | |
| revert the AquaSmart back to its | |
| radiant heating applications). | |
| HeatManagerTM algorithm until the battery | |
|
| |
| can be replaced. | c. The outdoor reset algorithm begins |
○ In normal operation, the WTS sends the | economizing immediately after a | |
| AWM the outdoor temperature every 10 - | Domestic Hot Water (DHW) call for heat, |
| 60 minutes. Pressing the WTS button | where the HeatManager takes time to |
| once forces a transmission. | reach full economizing after a DHW call. |
|
|
|
Figure 2 - AWM Installation
COM Port
4
