Targus Mobile Docking Station specifications Installing the Device and Drivers

Targus Mobile Docking Station with Video

NOTE: To download latest service packs, please visit your computer manufacturer’s website or Microsoft’s download centre:

http://support.microsoft.com/default.aspx?scid=fh%3BEN- US%3Bsp

Installing the Device and Drivers

To use the Targus Docking Station, you must first install the driver onto your computer. Connect the docking station to your computer and Windows plug-and-play will install the hardware drivers for each port.

WARNING: You must install the Docking Station software BEFORE connecting it to your computer. Otherwise, the Docking Station will not work properly.

Installing the Docking Station Driver

Installing the docking station driver enables your operating system to recognize the docking station and its ports once it’s connected.

1Turn on your computer.

2Insert the driver software CD into your computer’s CD- ROM drive.

3If setup does not begin automatically, click Start, Run, then enter D:\Setup.exe (where D: is the path of your CD-ROM drive) and then click OK.

4Follow any on-screen instructions to complete the installation.

5Click Finish and restart your computer when prompted.

9