6.3.5.5-Favourite Lists
Please see
6.3.5.6-Common Interface Module
To receive subscrıption channels you will need to purchase a conditional access module (CAM) and card. When no cam is fitted the display will show “No Common Interface module present.” However with a cam fitted the display will indicate “top up tv”.
In this menu, you can check the CI Module settings.
6.3.5.7-System Menu
You can display your television’s hardware and software data under this menu.
6.4-Performing Analogue Tuning
You can either tune the Analogue channels automatically or manually and store them in your television.
6.4.1-Automatic tuning of channels and storing in the memory
Note: If your television does not receive any aerial broadcast for a period of 5 minutes, it automatically switches to the
You can tune the programs automatically with the Autoprogram function of your television and then sort the channels
as you desire by means of the Program Table. Press AV button on your remote control, select ANALOGUE TV tab from the SOURCE menu by using Up/Down movement buttons and confirm by pressing the OK button. Your TV will switch to
Analogue mode. Press the MENU button on your remote control. Select SETUP tab with Down movement button and confirm with OK button. Setup menu is displayed.
Select PROGRAM NO tab by pressing the Up/Down movement buttons in Setup menu, enter the channel number to be searched and stored automatically, then select AUTOPROGRAM tab by using the Up/Down movement buttons and press OK button; Country Selection menu will be displayed.
COUNTRY SELECTION
BELGIUM | NETHERLANDS |
CZECH REP | NORGE |
DANMARK | ÖSTERREICH |
DEUTSCHLAND | POLSKA |
ELLADA | SCHWEIZ |
ESPANA | SUOMI |
FRANCE | SVERIGE |
HUNGARY | TÜRKİYE |
IRELANDA | U.K. |
ITALIA | .......................... |
START AUTOPROGRAMMING
In the Country Selection menu, select the UK option, by pressing the right/left movement buttons and start autoprogramming by pressing the OK button. The channels will be automatically searched and those found will be stored in memory starting from the program selected in the Setup menu. At the same moment, the Autoprogram menu will be displayed and a marker indicating the progress of the autoprogramming will appear as shown below.
To stop the process at any given time, please press the MENU button. The
AUTOPROGRAM
SEARCHING % 20
MENU STOP
Program Table, which will allow you to sort the channels as you wish, will be displayed after the automatic search is complete.
SETUP |
|
SYSTEM | I |
CHANNEL | S06 |
FINE TUNE | 0 |
SEARCH | P13 |
PROGRAM NO | |
STORE |
|
AUTOPROGRAM |
|
SELECT | MENU BACK |
15
