7Settings of Your New Television
7.1- Sound Menu Settings
You may perform volume settings by using the VOL+ or VOL-
buttons on your television or the VOL+/VOL- buttons on your remote control. You can perform
other Sound settings by entering the Sound menu. For this, press
the MENU button on your remote control. Select SOUND by pressing
the Up/Down movement buttons from the main menu and press the OK button. The Sound menu is displayed.
SOUND |
|
|
VOLUME |
|
|
BALANCE |
|
|
SOUND TYPE | STEREO | |
SOUND MODE | NORMAL | |
AVL | OFF |
|
EQUALIZER |
|
|
HEADPHONE |
|
|
SRS |
|
|
CHANGE | MENU BACK | |
You can select the tab which you want to process with the Down movement button and set its level with Left/Right movement buttons.
7.1.1-Balance
To adjust the sound balance between the right and left loudspeakers to the desired level, select the BALANCE tab in the sound menu by using the Down movement button. Using the Left/Right movement buttons adjust this option to the desired level.
7.1.2-Sound type
The program you watch may be broadcast in stereo or in two different languages. Using the Right/Left movement buttons in this menu, you can select Mono/Stereo or Dual-
7.1.3-Sound Mode
Sound mode can be set as NORMAL, SPATIAL or SRS by means of direction buttons. Spatial option gives depth to the
sound of the program. Options in the SRS menu become active when the SRS function is selected.
Note: SRS menu will not be active if the SRS is not selected from the Sound mode tab.
7.1.4-AVL (Automatic Volume Limiting)
Television transmitters have different sound levels. This can be noticed as high and low volume levels in different channels while switching from one program to another. Using the Left/Right movement buttons, select ON. The AVL (Automatic Volume Limiting) function maintains the same sound level as you switch from program to program. Select OFF to cancel it.
7.1.5-Headphones
By connecting headphones to your television you can listen to the program sounds independently from your television. To
turn up and down the headphone volume level, select HEADPHONE tab from the Sound menu and adjust the volume level by using the Left/Right movement buttons. When you want to hear the sound from the headphone only, just press the MUTE button on your remote control.
7.1.6-SRS TruSurround Sound
This is the virtual sound technology. With TruSurround, 6 different channels of the digital sound are processed in two channels and conveyed to the audience through two speakers. TruSurround system is used to create a virtual surround sound effect in environments where there is no 4.1 or 5.1 speaker systems exist.
TruSurround is a registered trademark of the SRS Labs. Inc.
TruSurround XT technology is covered under the license of SRS Labs. Inc.
18
