Belkin F1DA108PEA, F1DA116PEA, F1DA104PEA user manual Connect the Computer

Installation

Connect the Computer:

1.Using an OmniView KVM Cable (Belkin part# F3X1105b-XX, plug in the male VGA connector to the VGA port on the computer. Connect the other end (the female connector) of the VGA cable to the back of the PRO2 PS/2 labeled “VGA 01”.

2.Connect the PS/2 keyboard and PS/2 mouse connectors of the cable to the keyboard and mouse ports on the computer. Connect the other ends of the cables to the keyboard and mouse ports located directly underneath VGA 01 on the PRO2 PS/2 (Belkin part # F3X1105b-XX).

���	�����	�����	�� ��� ��	�����	�����	�����	��� ��	�����
	��	��	��	��	��	��	��	��

3. Repeat steps 1 and

2 for each additional PS/2 computer you wish to connect.

1

2

3

4

5

6

7

8

9

10

section

11