Belkin F1DA108PEA, F1DA116PEA On-Screen Display Menu Control, Using your PRO2 PS/2, section

section

1

2

3

4

5

6

7

8

9

10

Using your PRO2 PS/2

On-Screen Display Menu Control:

To access the On-Screen Display (OSD) menu, press “Scroll Lock”, “Scroll Lock”, and the space bar. Immediately, the OSD overlay screen will appear. The superimposed menu screen is generated by the PRO2 PS/2, and does not affect your computers or software function in any way.

The main OSD menu is shown below. It displays the current selected BANK. If you have only one PRO2 PS/2, it will display “BANK 00”.

A “✹“ symbol indicates that the computer is powered.

If a computer is connected and is powered up, but the OSD menu does not display a ✹ symbol, you will have to reset the PRO2 PS/2 to re-detect the powered computer. This is done by simultaneously pressing the “BANK +” and “BANK –” buttons on the front panel.

( ): SELECT: Navigate to different computers in the same BANK.

(PGUP/DN): BANK: Select previous BANK by pressing the “Page Up” key and next BANK by pressing the “Page Down” key.

(Insert): RENAME: Name each computer (up to 15 characters).

(ENTER): SAVE: Save the content input.

(TAB): SETUP: Open “Setup” menu.

(ESC): EXIT: Exit the On-Screen Display.

20