Belkin F1DA104PEA, F1DA116PEA, F1DA108PEA AutoScan Time, OSD Display Time, Updating Firmware

Using your PRO2 PS/2

AutoScan Time:

Specifies the amount of time the PRO2 PS/2 remains on a port before switching to the next port while in AutoScan mode. You may select different time intervals—7, 15, 30, or 60 seconds. Use the OSD to set the AutoScan time interval.

OSD Display Time:

Specifies the amount of time the OSD menu is displayed. Also specifies the amount of time the “Port Identification” tag displays on-screen after making a port selection. You may choose 7, 15, 30, or 60 seconds. For both settings, you may use the arrow keys to navigate. After you have selected the desired time intervals, push “Enter” key to save the entry. Press the “ESC” key to go back to the original OSD menu screen. Press the “ESC” key again to exit the On-Screen Display completely. Once you have selected a computer on the menu, press “Enter” to switch to that port.

Note: If there are Slave units connected, and the AutoScan time and OSD display time settings are set on the Master unit, the settings will also apply to all slave units.

Updating Firmware:

To update your firmware, download the appropriate firmware file and utility from belkin.com. The utility automatically guides you through the process of updating the firmware on your PRO2 PS/2.

Cautions and Warnings:

We strongly recommend that you update your firmware only if you are currently experiencing mouse and keyboard problems with your PRO2 PS/2, as reconfiguring software may lead to unexpected operational problems. Please contact Belkin Tech Support if you need assistance.

To update the firmware, you will need the following items:

1.A separate computer running Windows 95, 98, or Me. This computer must not be connected to the CPU ports on the PRO2 PS/2.

2.An available parallel port on the computer.

3.A flash cable that connects between the PRO2 PS/2 and the computer.

4.Firmware update files available at belkin.com.

1

2

3

4

5

6

7

8

9

10

section

21