Installation
How BANK Addresses are Assigned
All PRO3 Dual-User KVM Switches feature automatic BANK detection. The Switch will assign the proper BANK address to each secondary PRO3 KVM Switch based on the order in the daisy-chain sequence.
•For a single-unit configuration, the “BANK” on the PRO3 Dual-User KVM Switch is set to the “primary” (BANK address 00) setting. This is the factory default setting.
•For a multi-unit configuration, the “BANK” address for each secondary unit is automatically set to a unique BANK address (from 01 through 15).
Example:
Four 8-Port PRO3 Dual-User KVM Switches (F1DA208Z) are daisy-chained together to manage up to 32 servers. The primary KVM switch is automatically set to “BANK 00” (factory default) and the secondary units are each automatically set to a unique BANK (between 01 and 03).
Example of Daisy-Chain Configuration
cable 1 | | Primary unit (BANK 00) |
| |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
Secondary unit (BANK 01)
cable 2
Secondary unit (BANK 02)
cable 3
Secondary unit (BANK 03)
