Installation
Step 3
Connect the PS/2 or USB mouse cable to the mouse port on the back of the PRO3 KVM Switch in the “Console” section. (Refer to diagram below.)
Step 4
Attach the power adapter to the DC power jack labeled “12VDC, 1A” located on the rear panel of the PRO3 KVM Switch. Only use the power adapter supplied with the unit. (Refer to diagram below.)
1
2
3
4
5
6
7
8
section
(US power adapter shown)
Your PRO3 KVM Switch is now installed and you are ready to connect your servers.
10
