Bssid, Signal Quality, Encryption, Received Bytes | Belkin F5D8010

Using the Belkin Wireless Client Utility

(g) SSID

The network name of the router or access point.

(h) BSSID

This column will display the router or access point’s MAC address.

(i) Signal Quality

The signal strength of the related router or access point.

(j) Encryption

Will display “None” when encryption is disabled, “WEP” when either 64-bit or 128-bit encryption is enabled.

(k) Transmit Data Rate

This displays the transmit rate from the router to the Card.

(l) Receive Data Rate

This displays the receive rate from the router to the Card. The receive data rate may fluctuate as the Card is transmitting data.

(m) Transmitted Bytes

This displays the bytes that have been transmitted.

(n) Received Bytes

This displays the bytes that have been received.

(o) Band

This displays the frequency band the network is using.

(p) Channel

This displays the channel the network is on.

(q) Authentication

Displays the authentication settings the network is using.

(r) Encryption

Will display “None” when encryption is disabled, “WEP” when either 64-bit or 128-bit encryption is enabled.

(s) Power Consumption

This displays the power consumption settings the Card is currently using.

1

2

3

5	section
4

6

29

Image 31

Belkin F5D8010 Bssid, Signal Quality, Encryption, Transmit Data Rate, Receive Data Rate, Transmitted Bytes, Received Bytes

Contents

Wireless Pre-N Table of Contents Introduction Advantages of a Wireless Network Introduction Placement of your Wireless Router or Access Point Choose the Quietest Channel for your Wireless Network Cordless Phone PlacementAvoid Obstacles and Interference Secure Connections, VPNs, and AOL Overview Product Features Overview Product SpecificationsApplications and Advantages Activity LED Package ContentsCard Connector System Requirements Installing and Setting Up the Card Section Install the Wireless Client Utility Installing and Setting Up the Card Installation is now complete How to Access the Belkin Wireless Client Utility Using the Belkin Wireless Client UtilityNavigating the User Interface Scan Using the Expanded View Network ListShow Bssid Allow Roaming Profile Name Using the Belkin Wireless Client UtilitySetting Wireless Network Preferences Service Set Identifier Start Ad-Hoc Network Power SettingsSecurity Settings Box Save & Activate Cancel Bit WEP Securing your Wi-Fi NetworkWEP Wired Equivalent Privacy Encryption Methods Encryption Keys Bit Encryption WPA Wi-Fi Protected Access Changing the Wireless Security Settings WEP Setup Bit WEP Encryption C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key WPA-PSK no server WPA with server Settings Using the Belkin Wireless Client Utility Using the Belkin Wireless Client Utility Using the Belkin Wireless Client Utility Using the Belkin Wireless Client Utility Monitoring the Status of your Network Connection Bssid Signal QualityAuthentication Power Consumption Can’t connect to the Internet wirelessly Troubleshooting Name of your wireless network appears in Network List Power LED does not come on Card is not working Troubleshooting Link LED is solid but cannot connect to the Internet Signal strength is poorData transfer is sometimes slow Troubleshooting Troubleshooting Troubleshooting Frequency Wireless Comparison Chart Technical Support FCC Statement Information Information Belkin Corporation Limited Lifetime Product Warranty Wi-FI Interoperability Certificate Wireless Pre-N