GETTING STARTED
Table of Contents | sections | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Driver Installation
1.Insert the n52te Installation CD into your PC’s CD/DVD drive.
2.Driver installation will begin shortly. If it does not, click the “Start” button and choose “Run”. Click “Browse” and choose your CD drive. Select “setup.exe” and click “OK”.
3.Follow the
4.After the installation is complete, click “Finish” and reboot when prompted.
5.After your PC boots up, connect the n52te to an available USB port on your computer.
6.Please allow Windows to detect and fully initialize the n52te. Do not disconnect or reboot/shut down your system during this process.
7.Once driver initialization has finished, please reboot your system when prompted to do so by the installer.
Installation Verification
1.To check if installation was successful,
2.Check to make sure that the Device Manager list includes:
a.A new entry under Human Interface Devices, “n52te”.
b.A new entry under Human Interface Devices, “Virtual HID Device”.
n52te | 2 |
