Shutting down the projector
1.Press II Power and a confirmation message
displays prompting you.
If you don't respond in a few seconds, the message will disappear.
2. Press II Power a second time. The POWER indicator light flashes orange, the projection lamp shuts down, and the fans will continue to run for approximately 90 seconds to cool down the projector.
3.Once the cooling process finishes, the POWER
indicator light is a steady orange and fans stop.
4. Disconnect the power cord from the wall socket if the projector will not be used in an extended period of time.
• To protect the lamp, the projector will not respond to any commands during the cooling process.
•To shorten the cooling time, you can also activate
the Quick Cooling function. See "Quick Cooling" on page 43 for details.
•Do not unplug the power cord before the projector shutdown sequence is complete or during the
•If the projector is not properly shut down, to protect the lamp, when you attempt to
