10.Tighten the screws that secure the lamp
cover.
• Loose screw may cause a bad connection, which could result in malfunction.
• Do not over tighten the screws.
11.Restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
12. After the startup logo, open the | Notice |
| |
Display (OSD) menu. Go to the SYSTEM |
| ||
Reset Lamp Timer? | |||
SETUP: Advanced > Lamp Settings menu. | |||
Press Mode/Enter. The Lamp Settings page | Reset | Cancel | |
displays. Press to highlight Reset lamp | |||
|
| ||
timer and press Mode/Enter. A warning
message displays asking if you want to reset the lamp timer. Highlight Reset and press Mode/Enter. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this could cause damage.
50 Maintenance
