DigiTech RP1000 15, Editing/Creating Presets, Editing Amp/Cabinet Models, Amp/Cabinet Bypass

15 Editing/Creating Presets

The easiest way to start editing presets is with the Tone Library and Effects Library knobs.

Try out some of the tones in the Tone Library and then try out some effects setups with

the Effects Library knob. Use the Effects Level Knob to increase or decrease the overall

Chorus/FX, Delay and Reverb levels if desired. Once you find a tone that’s pretty close to what

you want, use the Edit buttons to navigate through the individual effects to make some adjust-

ments. The steps below go into more detail about how this works.

1. Select a tone

with the

Tone Library knob

2. Select an effect

or effects chain with the

Effects Library knob

3. Adjust the

effects level with the

Effects Level knob

To edit and create a preset:

Use the 1. Up, Down and numbered Footswitches to select the preset you wish to edit.

If you ﬁnd a preset close to what you want, you can begin editing the effect parameters by

pressing the Edit Up/Down buttons and selecting the Effect row you want to edit.

If you are trying to ﬁnd something different from the existing presets, begin by using the

Tone Library, Effects Library and Effects Level knobs to get close to a sound you

want.

Press the

4. Edit Up/Down buttons to begin selecting the individual Effects rows to edit

their parameters.

To bypass or enable an Effect row, press the 5. Tone Library knob.

Use the 6. Knobs 2-6 to modify the effect parameter settings.

Note: Anytime a stored value within a preset is changed, the Store button LED lights up. This

indicates that you need to store the changes. Changing presets, or turning the power off before

storing any changes, erases any changes made and the RP1000 will revert to the stored values

for the preset.

Also, if you are using the RP1000 with the Amp/Cabinet Bypass button enabled (effects only),

Tone Libraries that use amps only will not provide distortion or tone changes since amps and

cabinets are globally disabled.

Editing Amp/Cabinet Models

Each RP1000 preset has a ton of world class amp and cabinet models to choose from. To edit

amp and cabinet models, follow these steps:

Press the 1. Edit Down button until the Amp/Cabinet row is selected. The row’s LED

should be lit and the current amp model should be shown in the display.

Turn 2. Knob 1 to select from the different amp models.

Press 3. Knob 1. The current cabinet model will now be displayed. Turn Knob 1 to select

from the different cabinet models. Pressing Knob 1 again will return you to the amp model

display

To bypass amp/cabinet models in a preset, turn 4. Knob 1, fully clockwise until direct ap-

pears in the RP1000’s main display, or enable the Amp/Cabinet Bypass button.

Amp/Cabinet Bypass

The RP1000 has the unique feature of being able to turn off amp and cabinet modeling globally in

all presets. This feature is extremely useful when you just want to add effects processing to your

own core ampliﬁer sound. The RP1000 basically becomes a straight multi-effects box where only

Wah, Compressor, Distortion, Equalizer, Noise Gate, Chorus/FX, Delay, Reverb and any effects

connected to the Stomp Loop are the only effects being used.