DigiTech RP1000 A

Amp/Cabinet Bypass

You can also turn off the internal amps and cabinets for all the presets in the RP1000. This is

really useful when you just want to add effects processing to your own core ampliﬁer sound. So

basically the RP1000 becomes a straight multi-effects box when you do this, and only Wah, Com-

pressor, Distortion, Equalizer, Noise Gate, Chorus/FX, Delay, and Reverb are used.

To bypass amp/cabinet modeling in all presets, press the Amp/Cabinet Bypass button. When

that button is lit, amp/cabinet modeling is bypassed in all presets.

You can use amp/cabinet bypass in Preset or Pedalboard mode.

Tuner

The RP1000’s built-in tuner lets you quickly and easily tune your guitar, even on a dark stage.

Just press and hold the currently active preset’s Footswitch for 2 seconds. The Display brieﬂy

shows bypass then tuner to let you know you’re in Tuner mode. To begin tuning, play a note

on your guitar (a harmonic at the 12th fret usually works best). The Numeric Display shows

the note being played. Arrows on the right mean the note is sharp and should be tuned down.

Arrows on the left mean the note is ﬂat and should be tuned up. A left and a right arrow in the

center mean the note is in tune. The Expression Pedal controls the guitar volume while tuning.

Exit tuner mode by pressing any Footswitch.

A

Note being played

Left and right arrows

in the center indicate

note is in tune

If you use an alternate tuning, like down a half-step or drop D, you can still use the tuner as if

you were in standard tuning. Just go into Tuner mode and change your tuning reference. The

default setting is standard tuning, where A=440 Hz (displayed as a=440). But when you’re in

Tuner mode, you can rotate Knob 1 to pick an alternate tuning. These include a = a , a =

G, a = G , and tuning references a=427 - a=453.

Tone Library (Knob 1)

This is one of the RP1000’s coolest features. In Pedalboard and Preset modes, you turn this knob

to pick from a list of amp tones like Blues or Metal or Country. Each one has different Com-

pressor, Distortion, Amp/Cabinet type, EQ, and Noise Gate settings, but you don’t have to mess

with any of those settings if you don’t want to, they just load up automatically when you pick

a tone from the library. If you’re into it, you can go ahead and reﬁne the sound by editing the

preset (see Editing/Creating Presets on page 15), but the thing is you don’t have to. The Tone Li-

brary doesn’t change the Chorus/FX, Delay or Reverb, so you can experiment with different amp

styles quickly with the current effect chain. When in Amp/Cabinet Bypass Mode, the ampliﬁers

are bypassed, so only the distortion and overdrive stompboxes are providing distortion.

Effects Library (Knob 2)

This knob works hand-in-hand with the Tone Library knob. In Pedalboard and Preset modes, this

knob selects from a variety of post-ampliﬁer effect chains (Chorus, Chorus + Delay, Delay + Re-

verb, etc.). And just like with the Tone library, you can edit the preset if you want to (see Editing/

Creating Presets on page 15), but you don’t have to. Changing between different Effects Library

selections doesn’t change the Compressor, Distortion, Amp/Cabinet types, EQ, and Noise Gate

settings, so you can experiment with different effect chains quickly with the current amp tone.

Effects Level (Knob 3)

In Pedalboard and Preset modes, this knob changes the relative level of the post-amp effects

(Chorus/FX, Delay, and Reverb). It’s like an effects mix control, where turning it clockwise

increases the level of these effects and turning it counter-clockwise decreases the level of these

effects.