DigiTech RP1000 owner manual Create Your Sound in Three Easy Steps, Amp Gain/Effect Parameter Knob

Amp Gain/Effect Parameter (Knob 4)

This knob adjusts the Gain (distortion) for the selected Amp (not available for Acoustic) and is also used to adjust parameters of other effects in the matrix.The amplifier and cabinets can’t be adjusted when the Amp/Cabinet Bypass button is enabled.

Amp Level/Effect Parameter (Knob 5)

This knob adjusts the Level (volume) of the selected amp and adjusts other effect parameters in the matrix. Amp Level can’t be adjusted when the Amp/Cabinet Bypass button is enabled.

Master Level (Knob 6)

This knob controls the overall output volume of all of the RP1000’s presets and adjusts other effect parameters in the matrix.

X-EditTMEditor/Librarian

You can edit your RP1000 with your computer, using the X-EditTMEditor/Librarian, which you can download from www.digitech.com.

Presets

Presets are named and numbered locations of programmed sounds which reside in the RP1000 (in case you didn’t know). You load Presets with the Footswitches (see Preset Mode and Pedal- board Mode on page 14 for more information about that). The active effects in each preset are indicated by lighted LEDs in the Effect Matrix, and if you’re in Pedalboard mode, the LEDs over footswitches 6-10 show you which of those effects are on or off. The RP1000 comes with 100 User presets (1-00) and 100 Factory presets (F1-F00). You can save changes to the User presets, but not the Factory presets. From the factory, the 100 User presets are exact duplicates of the 100 Factory presets. That way you can create your own presets without losing the sounds that came with the RP1000.

Create Your Sound in Three Easy Steps

1.

Tone Library

Select one of 40 different tones from rock, metal, blues, country, and more. The tones consist of a combination of Compressor, Distortion Stompbox, Amplifier/Cabinet, EQ, and Noise Gate.

For a complete list of available tones, see page 51.

2.	Effects Library
	Select one of 40 different effects chains. The effects consist of a com-
	bination of Chorus/FX, Delay, and Reverb.
	For a complete list of available effects chains, see page 51.

3.	Effects Level
	Adjust the overall level of the post-amp effects to your liking.

To make further edits, refer to page 15. To store the preset, refer to page 16.

3