Pitch Shift (PitCH)

A Pitch Shifter copies the incoming signal, then shifts the pitch of the copy to a different note. The shifted note is then mixed back with the original signal, sounding as if two guitars were play- ing different notes.

Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain.Turn counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post (appears after the Noise Gate effect).

Shift Amount - Knob 3 selects the interval of the shifted pitch. Ranges from -24 (2 octaves below) to 24 (2 octaves above).

Mix - Knob 6 controls the mix level of the shifted pitch. Ranges from 0 to 99.

Detune (DetUNe)

A Detuner makes a copy of your incoming signal, takes the copied signal slightly out of tune from the original, then mixes the two signals together. The result is a doubling type of effect as if two guitars were playing the same part together.

Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain.Turn counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post (appears after the Noise Gate effect).

Shift Amount - Knob 3 adjusts the amount of detune shift. Ranges from -24 to 24 cents.

Level - Knob 6 controls the mix of the detuned note. Ranges from 0 to 99.

Harmony Pitch Shifting (harmony)

Harmony Pitch Shifting makes a copy of the incoming signal, and then changes the pitch of the copied note to a diatonically correct interval specified by the Amount parameter. A Harmony Pitch Shifter sharpens or flattens the shifted pitch in order to keep the specified interval within the selected key and scale creating a true harmony.

Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain.Turn counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post (appears after the Noise Gate effect).

Shift Amount - Knob 3 selects the amount or harmony interval for the Harmony Pitch Shifter. Interval choices include:

OCT Dn

(octave down)

2ND UP (a second above)

7TH Dn

(a seventh below)

3RD UP (a third above)

6tH Dn

(a sixth below)

4TH UP (a fourth above)

5tH Dn

(a fifth below)

5TH UP (a fifth above)

4tH Dn

(a fourth below)

6TH UP (a sixth above)

3RD Dn

(a third below)

7TH UP (a seventh above)

2ND Dn

(a second below)

OCT UP (an octave above)

Key - Knob 4 selects the musical key that the HPS uses. Key choices range from the Key of E (KEY E) through the Key of Eb (KEY E ).

Scale - Knob 5 selects the scale the HPS will use. Scale choices include: Major (MAJOR), Minor (MINOR), Dorian (DORIAN), Mixolydian (MIXOLYdn), Lydian (LYDIAN), and Har- monic Minor (HarmMINr).

Level - Knob 6 adjusts the HPS Level of all the pitch-altering effects in this module. Ranges from 0 to 99.

28

Page 32
Image 32
DigiTech RP1000 owner manual Pitch Shift PitCH, Detune DetUNe, Harmony Pitch Shifting harmony