22
EQ
The RP1000’s EQ helps further shape your tone with Low, Mid, and High controls.
Knob 1 - Press Knob 1 to turn the EQ on and off.
Low Level - Knob 2 adjusts the Low EQ level. Ranges from -12dB to
12dB.
Mid Frequency - Knob 3 selects the frequency that the Mid parameter adjusts. Range
Is from 300 Hz to 4000 Hz.
Mid Level - Knob 4 adjusts the Mid EQ level. Range is
from -12dB to 12dB.
High Frequency - Knob 5 adjusts the High EQ frequency. Range is from 2000 Hz to
8000 Hz
High Level - Knob 6 adjusts the High EQ level. Range is
from -12dB to 12dB.
Low Frequency (X-EditTM only) - This parameter selects the Low EQ frequency.
Ranges from 60 Hz to 500 Hz.
Low, Mid, and High Bandwidth (X-Edit only) - This parameter selects the frequency
bandwidth for each frequency band. Range is from Narrow to Wide.
Noise Gate/Auto Swell
A Noise Gate is designed to eliminate noise while you are not playing, or provide an auto
volume swell effect.
Gate Type - Knob 1 selects between the DigiTech® noise gate or the volume swell effect.
Values include: (Selects the Noise Gate) and (Selects the Auto Swell effect.)
Press this knob to turn the Noise Gate/Auto Swell on and off.
Threshold (Noise Gate only) - Knob 2 sets the signal strength (Threshold) required
to open or close the Noise Gate. Parameters range from (opens easily) to (requir-
ing strong signals to open).
Attack Time - Knob 3 sets the attack time. Ranges from (shorter attack time) to
(longer attack time).
Release - Knob 4 sets the Release parameter. Ranges from to .
Attenuation - Knob 5 sets the Attenuation parameter. Ranges from to .
Swell Sensitivity (Auto Swell only) - Knob 6 sets the Swell Sensitivity parameter of
the Auto Swell. Ranges from to .
Chorus/FX
The Chorus/FX row in the RP1000 is a multi-function module, allowing you to select Effect types
such as Chorus, Flanger, Phaser, Vibrato, Rotary Speaker, Tremolo, Panner, Envelope Filter,
Detune, Whammy™, Pitch Shift, Detune, Harmony, OC Octaver and more. When the Chorus/
FX row is selected, Knob 1 is used to choose the Effect type. Press this knob to turn these
Effects on and off. Only one of the effects in this row can be used at a time. After selecting the
type of effect in this module, Knobs 2-6 can then be used to adjust the individual parameters
associated with the selected effect. The following list describes each Effect and its parameters in
more detail:
Chorus
A Chorus adds a short delay to your signal. The delayed signal is modulated in and out of tune
and then mixed back with the original signal to create a thicker sound. The RP1000 includes
the following Chorus Effects: (based on the classic Boss® CE-2 Chorus),
(based on the TC Electronic Chorus), (DigiTech®’s Dual Chorus),
(DigiTech’s Glistening Chorus) and (DigiTech’s famous Multi Chorus®),
(based on the VooDoo Labs Analog Chorus), and (Based on the Electro Harmonix Small
Clone).