Controls and functions
Projector
1
2
10
3
4 | 11 | |
| ||
5 | 12 | |
6 | ||
13 | ||
7 | ||
14 | ||
8 | ||
| ||
9 | 10 |
1.Focus ring
Adjusts the focus of the projected image. See
2.Zoom ring
Adjusts the size of the image. See "Fine- tuning the image size and clarity" on page 27 for details.
3.Menu/Exit
Turns on the
4.POWER indicator light
Lights up or flashes when the projector is under operation. See "Indicators" on page 51 for details.
5.II Power
Toggles the projector between standby mode and on. See "Starting up the projector" on page 22 and "Shutting down the projector" on page 38 for details.
6.TEMPerature indicator light
Lights up red if the projector's temperature becomes too high. See "Indicators" on page 51 for details.
7.
Left/ 
Starts the FAQ function. See "Utilizing FAQ function" on page 36 for details.
8.LAMP indicator light
Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 51 for details.
9.BLANK
Used to hide the screen picture. See "Hiding the image" on page 35 for details.
10.Keystone/Arrow keys ( 
/
Up, 
/
Down)
Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 28 for details.
11.AUTO
Automatically determines the best picture timings for the displayed image. See
12.
Right/ 
Activates panel key lock. See "Locking control keys" on page 35 for details. When the
13.Mode/Enter
Selects an available picture setup mode. See "Selecting a picture mode" on page 30 for details.
Enacts the selected
14.SOURCE
Displays the source selection bar. See "Switching input signal" on page 26 for details.
