
Notice | The lamp has been in operation for 4000 hours. | |
| ||
Replace Lamp Now | It is strongly recommended that you replace the | |
lamp at this age. The lamp is a consumable item. | ||
Lamp > 4000 Hours | The lamp brightness diminishes with use. This is | |
normal lamp behavior. You can replace the lamp | ||
Lamp usage time exceeded | ||
whenever you notice that the brightness level has | ||
| ||
OK | significantly diminished. If the lamp is not | |
replaced beforehand, it must be replaced after 3000 | ||
| ||
| hours usage. | |
|
| |
Notice | The lamp MUST be replaced before the projector | |
will operate normally. | ||
| ||
| ||
Replace lamp (refer to User's manual) |
| |
Then reset lamp timer |
| |
OK |
| |
|
|
Replacing the lamp
• To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before changing the lamp.
•To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the lamp.
•To reduce the risk of injuries to fingers and damage to internal components, use caution when removing lamp glass that has shattered into sharp pieces.
•To reduce the risk of injuries to fingers and/or compromising image quality by touching the lens, do not touch the empty lamp compartment when the lamp is removed.
•This lamp contains mercury. Consult your local hazardous waste regulations to dispose of this lamp in a proper manner.
•To assure optimal performance from the projector, it is recommended that you purchase a BenQ projector lamp for lamp replacement.
•If lamp replacement is performed while the projector is suspended
1.Turn the power off and disconnect the projector from the wall socket. If the lamp is hot, avoid burns by waiting for approximately 45 minutes until the lamp has cooled.
2.Turn the projector over. Then use a coin to
turn the screw counterclockwise until the lamp cover loosens.
Maintenance 53