Installation

Installing the Rails

Installing the Rails

Procedure

Step 1 Remove the mounting template (Cisco 78-19093-01) from the accessory box. The template is designed to show you the proper holes within which the rails and cage nuts should be placed. Once the rack holes line up with the template, you should mark the holes so that their position is known after removing the template.

Step 2 Adjust the length of the rail by sliding the ends of the rail back and forth until they match the depth of the rack.

Figure 16: Adjusting the Tool-less Rack Mount Rail

192517

Step 3 Place the two hooks at each end of the rail into the first two holes at a rack unit boundary.

Figure 17: Hole Spacing for the Tool-less Rails in Relationship to a Rack Unit

.500

.625

.625

.250

192731

Cisco UCS 5108 Server Chassis Installation Guide

36

OL-20035-05

Page 48
Image 48
Cisco Systems UCSEZINFRACHSS manual Installing the Rails, Adjusting the Tool-less Rack Mount Rail