•ESDwrist strap
•Cableswith connectors (including the N20-BKVM=, which is the KVM/local I/O console dongle)
•Anyoptional items ordered
Step 3 Verifythat all unused blade slots and power supply bays have blank covers.
Attaching the Round Hole Adapter Kit to the Rails (Optional)Thechassis tool-less rails are designed for racks that have square mounting holes. You must use the round
holeadapters (N20-CRMK2-RHA=) to install the chassis in racks that have round mounting holes.
Note
Thisround hole adapter kit allows you to adapt the rail kit (N20-CRMK2=) to install into rack (front and/or
rear)posts that use either threaded or non-threaded round holes. Four adapters in the kit are for adapting the
railkit to install into rack posts with threaded round holes, and the other four adapters in the kit are for adapting
therail kit to install into rack posts with non-threaded round holes. You can use a combination of adapters
basedon the type of holesin the rack posts. Various sizes and lengths of screws are also included in the kit.
Procedure
Step 1 Insertthe adapter tab into the mounting rail as shown in callout 1.
Step 2 Slidethe adapter up to lock it into position as shown in callout2.
Step 3 Securethe adapter into place using the provided pan-head screw as shown in callout 3.
Figure 15: Attaching the Round Hole Adapter (Optional)
279771
1
2
3
Cisco UCS 5108 Server Chassis Installation Guide
34 OL-20035-05
Installation
Attaching the Round Hole Adapter Kit to the Rails (Optional)