Procedure
Step 1 Removethe mountingtemplate (Cisco 78-19093-01)from the accessory box. The template is designed to
showyou the proper holes within which the rails and cage nuts should be placed. Once the rack holes line up
withthe template, you should mark the holes so that their position is known after removing the template.
Step 2 Adjustthe length of the rail by sliding the ends of the rail back and forth until they match the depth of the
rack.
Step 3 Placethe adapters and rails even with a rack boundary at each end of the rail.
Step 4 Securethe rail to the rack with the provided pan head screws as shown below.
Figure 21: Attaching the Mounting Brackets to a Round Hole Rack
279772
Cisco UCS 5108 Server Chassis Installation Guide
40 OL-20035-05
Installation
Installing the Round Hole Adapter Kit