Installation

Replacing a Copper Twinax SFP+ Transceiver with an Optical SFP+ Transceiver

Replacing a Copper Twinax SFP+ Transceiver with an Optical SFP+ Transceiver

Procedure

Step 1 Remove the copper Twinax SFP+ from the FEX port by pulling gently on the rubber loop. The cable and SFP+ transceiver come out as a single unit, leaving the FEX port empty.

Figure 31: Removing a Twinax Copper SFP+ Transceiver

192627

Step 2 Insert the optical SFP+ transceiver into the FEX port. Make sure that it clicks firmly into place. Step 3 Plug the fiber-optic cable into the optical SFP+ transceiver.

Figure 32: Replacing a Copper SFP+ Transceiver with an Optical SFP+ Transceiver

192666

Cisco UCS 5108 Server Chassis Installation Guide

OL-20035-05

53

Page 65
Image 65
Cisco Systems UCSEZINFRACHSS manual Removing a Twinax Copper SFP+ Transceiver