English
16.LIGHT
Turns on or off the remote control backlight for about 10 seconds. Pressing any other key while the backlight is on keeps the backlight on for a further 10 seconds.
17.
POWER OFF
Turns off the projector. See "Shutting down the projector" on page 43 for details.
18.
Displays the
19.PC
Displays the PC source selection. See "Switching input signal" on page 29 for details.
20.HDMI 2
Displays the HDMI 2 source selection. See "Switching input signal" on page 29 for details.
21.Right cursor/Increase volume level ( 
/
)
: Navigates and changes settings in the OSD. See "Using the menus" on page 26 for details.
: Increase Volume.
22.Down cursor/Keystone ( 
/ 
)
: Navigates and changes settings in the OSD. See "Using the menus" on page 26 for details.
: Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 31 for details.
23.ASPECT
Select the display aspect ratios. See "Selecting the aspect ratio" on page 32 for details.
24.FREEZE
Freeze/unfreezes the
25.AUTO
Automatically determines the best picture timings for the displayed image.
26.SHARP
Displays the SHARPNESS setting bar. See "Adjusting Sharpness" on page 36 for details.
27.CONTRAST
Displays the CONTRAST setting bar. See "Adjusting Contrast" on page 36 for details.
28.BLANK
Hides the screen picture. See "Hiding the image" on page 40 for details.
29.TINT
Displays the TINT setting bar. See "Adjusting Tint" on page 36 for details.
30.TEST
Displays the test pattern.
12 Introduction
