Connecting S-Video source devices

Examine your Video source device to determine if it has an unused S-Video output socket available:

If so, you can continue with this procedure.

If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to an S-Video source device:

1.Take an S-Video cable and connect one end to the S-Video output socket of the Video source device.

2.Connect the other end of the S-Video cable to the S-VIDEOsocket on the projector.

To connect the projector to an Audio source device:

1.Take a suitable audio cable and connect one end to the AUDIO OUT jack of the AV

device. Connect the other end of the cable to the AUDIO IN jack on the projector. Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Adjusting the sound" on page 42 for details.

The final connection path should be like that shown in the following diagram:

S-Video Cable

AV device

 

 

COMPUTER

 

 

COMPONENT

S-VIDEO

VIDEO

PC

HDMI-1

HDMI-2

 

USB

RS-232

 

 

 

 

 

 

 

 

 

 

AUDIO

L

AUDIO R

 

 

 

OUT

IN

 

 

Audio Cable

If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

If you have already made a Component Video connection between the projector and this S-Video source device using Component Video connections, you need not connect to this device using an S-Video connection as this makes an unnecessary second connection of poorer picture quality. See "Connecting Video source devices" on page 20 for details.

English

Connections 23

Page 23
Image 23
BenQ W1060 user manual Connecting S-Video source devices, To connect the projector to an S-Video source device