English

Replacing the remote control battery

1.Remove the battery compartment cover by sliding the cover in the direction of the arrow.

2.Insert the supplied batteries taking note of the polarity (+/-) as shown here.

3.Replace the cover.

• Avoid excessive heat and humidity.

There may be battery damage if the battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the battery manufacturer.

Dispose of the used battery according to the battery manufacturer’s instructions.

Never throw a battery into a fire. There may be danger of an explosion.

If the battery is dead or if you will not be using the remote control for a long time, remove the battery to prevent damage to the remote control from possible battery leakage.

14 Introduction

Page 14
Image 14
BenQ W1060 user manual Replacing the remote control battery