BenQ W1060 user manual Description of each menu, Picture Mode

Description of each menu

	FUNCTION	DESCRIPTION
	Picture Mode	Pre-defined picture modes are provided so you can optimize your
		projector image set-up to suit your program type. See "Selecting a
		picture mode" on page 35 for details.
	Reference	Selects a picture mode that most suits your need for the image quality
		and further fine-tune the image based on the selections listed on the
	Mode
		same page below.
	Brightness	Adjusts the brightness of the image. See "Adjusting Brightness" on
		page 36 for details.
1.	Contrast	Adjusts the degree of difference between dark and light in the image.
		See "Adjusting Contrast" on page 36 for details.
PICTURE:
		Adjusts the color saturation level -- the amount of each color in a
	Color	video image. See "Adjusting Color" on page 36 for details.
		This function is only available when Video or S-Video with NTSC
		system is selected.
Basic
		Adjusts the red and green color tones of the image. See "Adjusting
	Tint	Tint" on page 36 for details.
		This function is only available when Video or S-Video with NTSC
menu
		system is selected.
		Adjusts the image to make it look sharper or softer. See "Adjusting
	Sharpness	Sharpness" on page 36 for details.
		This function is only available when Video or S-Video with NTSC
		system is selected.
	Flesh Tone	See "Adjusting Flesh Tone" on page 36 for details.
	Save Settings	Saves the settings made for User 1 or User 2 or User 3 mode.
	Reset Picture	Resets the picture settings for User 1 or User 2 or User 3 mode.
	Settings

English

Operation 47