STB & PVR Function
54
5) Power Off during Recording
If you a ttempt t o put t he FV-L1 int o standby mode wh ile a r ecordin g is
in progress, a “Power Off” dialog will be displayed, as shown below.
You can then choose from the following options;
Later: the FV-L1 will return to standby mode when the current
recording(s) have completed.
Yes: the current recording(s) are stopped and the FV-L1 goes into
standby mode immediately.
No: the standby mode procedure is cancelled and the FV-L1 remains
on.
Use the
LEFT/RIGHT
buttons to select your desired option and press
OK
.
If a timer starts while the FV-L1 is in st andby m ode, the FV-L1 will turn
on automatically and perform its operation until the timer has
completed. If re mote contr ol activity is detecte d du r in g t h i s p eriod, the
FV-L1 will remain on so you can continue to use it w ithout int erruption,
otherwise it will return to standby mode.
NOTE
If AC power is not supplied to the FV-L1 properly (e.g. a power
blackout), it cannot perform a timer r e c ording. If a timer fai ls due to
this reason, this timer remains in the timer list as notification.
If AC power is restored within a timer’s duration, the timer will
become active immediately and recording will begin.
If AC power is not supplied for a long period i.e. several hours, the
internal clock of the FV-L1 will lose it ’s time setting, and al l timers will
fail until the time setting is restored (see “Time Setting” section in
Chapter 4).
If you do not r espon d to the “Powe r O f f” pop-up di alo g, t h e FV-L1 will
behave as if you selected “Later”, and return to standby mode when
the recording is finished