Beyonwiz FV-L1 manual Change Recording Options while Recording

STB & PVR Function

2) Change Recording Options while Recording

You can change some of the recording options even after the recording has started. Press the POP-UPbutton and use the DOWN button to select “Recording Information”, and then press OK.

The “Recording Information” window will now be displayed, containing one or two current recordings. Use the UP/DOWN buttons to select the recording you wish to change.

You can now change the following recording options;

Duration: To change the duration, press the LEFT or RIGHT button.

File Name: To change the file name press the RED button.

File Lock: To change the lock status of the recording file, press the GREEN button.

See “Instant Recording” or “Add New Timer” sections earlier in this chapter for a detailed explanation of these recording options.

NOTE

You can stop the recording instantly by pressing the STOP button.

You can view the service being recorded by pressing the OK button.

The clock mark indicates the recording is due to a timer.

Extending the duration of a timer so that it overlaps two existing timers at the same time point will cause a timer conflict (see “Timer Conflict” section next in this chapter).

57