STB & PVR Function
38
2) Change Service with Service List
The service list contains all the broadcasting services your FV-L1 can
receive. Press the
LIST
button to display the service list, as shown
below;
The service list window is titled “TV Service” or “Radio Service”,
depending on which service mode you are currently using, and will list
all available TV or radio services ac cordingly. Select a service by using
the
UP/DOWN
buttons, and press the
OK
button to change to that
service.
If your s e r vi c e list i s very long, you c a n s c r oll th r ough th e list quickly by
using the
LEFT/RIGHT
buttons to skip up and down one page
respectively. To hide the serv i ce li st wi n do w, press the
EXIT
button.
NOTE
You can extend the service list window by hi di ng the h e l p bar s h ow i ng
along the bottom of the screen. Press the
RED
button to swap
between hiding and showing the help bar.
You can also edit the service list to rename, delete or lock services
(see “Service List Edit” section later in this chapter).
If you have enabled the LiDiC in the Setup menu (se e “LiDiC” se ction
in Chapter 4), services named “950 LiDiC 1” and “951 LiDiC 2” will
appear in the service list. You can watch and enable the PVR
funct i ons for e xt ernal A/V signals by s e l e c ting the 950 or 951 service s.