Billion Electric Company 7404V Series Rear Ports, Console Port as LAN port, Phone, Eaning

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

The Rear Ports

6 5 3 1

8 7 4 2

The Ethernet Port # 4 can be used as a console port. You need a special console tool which already includes in the package to connect with LAN port 4 and PC’s RS-232 port (9-pin serial port).

Port

1Power Switch

2 PWR

3RESET

LAN

41X — 4X (RJ-45 connector)

Console Port (as LAN port 4)

4(RJ-45 connector)

Phone

51X — 2X (RJ-11 connector)

eaning

Power ON/OFF switch

Connect the supplied power adapter to this jack.

To be sure the device is being turned on	press RESET
button for:

1-3 seconds: quick reset the device.

6 seconds above, and power off, power on the device: restore to factory default settings. (Cannot login to the router or forgot your Username/Password. Press the button for more than 6 seconds).

Caution: After pressing the RESET button for more than 6 seconds, to be sure you power cycle the device again.

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the LAN ports when connecting to a PC or an office/home network of 10Mbps or 100Mbps.

Caution: Port 4 can be either a LAN or Console port at a time but not both.

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the LAN ports when connecting to a PC or an office/home network of 10Mbps or 100Mbps.

Caution: Port 4 can be either a LAN or Console port at a time but not both.

Connect RJ-11 cable to this port when connecting to an analog phone set.

6

LINE

(Router with LINE port only)

Connect RJ-11 cable to this port when connecting to the telephone wall jack.

9

Chapter 2: Installing the router