VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
IGMP
IGMP, known as Internet Group Management Protocol, is used to management hosts from multicast group.
IGMP Forwarding: Accepting multicast packet. Default is set to Enable.
IGMP Snooping: Allowing switched Ethernet to check and make correct forwarding decisions. Default is set to Disable.
VLAN Bridge
This section allows you to create VLAN group and specify the member.
Edit: Edit your member ports in selected VLAN group.
Create VLAN: To create another VLAN group.
Advanced VLAN Setup Example (Triply Play)
VLAN_data:
Ethernet Port 1, Wireless and Wireless WDS are reserving for Internet - On Ethernet port 1 I also need VC 0/40 bridged.
VLAN_Vedio
Ethernet ports: 2, 3 and 4:
-0/33
-0/34 Video
-0/35 Video
-0/36 Video Subscriber Services (EPG, EAS, etc.)
-0/37 Video
-0/38 Video
-0/39 Spare
Step 1: Setup Member Ports
Go to Configuration LAN Bridge Interface.
You can setup member ports for each VLAN group under Bridge Interface section. From the example, two
147
Chapter 4: Configuration