
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
Factory Default Settings
Before configuring your, you need to know the following default settings.
Web Interface (Username and Password)
Username: admin
Password: admin
The default username and password are “admin” and “admin” respectively.
| If you ever forget the username/password to login to the router, you may |
| press the RESET button up to 6 seconds to restore the factory default |
| settings. |
A | Caution: After pressing the RESET button for more than 6 seconds, to be sure you power |
cycle the device again. | |
Attention |
|
Device LAN IP settings
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
ISP setting in WAN site
PPPoE
DHCP server
DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are
LAN Port
IP address |
| 192.168.1.254 | |
Subnet Mask |
| 255.255.255.0 | |
|
|
| |
DHCP server function |
| Enabled | |
IP | addresses | for | 100 IP addresses continuing from |
distribution to PCs |
| 192.168.1.100 through 192.168.1.199 |
WAN Port
The PPPoE function is enabled to automatically get the WAN port configuration from the ISP.
17
Chapter 3: Basic Installation