Billion Electric Company 7404V Series 124, Special Dial Codes, Option Description Flash-hook

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

Special Dial Codes

The following table lists the special dial codes that are built-in to the system:

Option		Description
Flash-hook		Switch to PSTN line
		Note: A quick press of the hook. On some phones a button is
(Wireless Router with
		provided which provides Flash-hook functionality. The button is
LINE port only)		marked "FLASH" or "RECALL".
		Return the last missed call for SIP service only
*69		Note: Entering this on a phone will call the last number which
		made a call to the phone. For example A makes a call to B, but
		hangs up before B answers. If B enters *69, A will be called.
##		Last number redial
		Set do not disturb on
		Note: It is possible to set a Do-Not-Disturb feature on a phone
*20		such that any phone which calls the phone will receive an engaged
		tone and the phone called will not ring. For example, B enters *20
		and hangs up. A makes a call to B, and receives the engaged tone
		and phone B does not ring.
*80		Set do not disturb off
		Set the number for Speed dial code ‘x’, where ‘x’ is a number
		between 2 and 9.
		Note: Where <x> is a number between 2 and 9, and <number> is
*74<x><number>#		the number to dial. The code needed to dial a speed dial from a
		phone connected to a VoIP Router is:
		<x>#, where <x> is a number between 2 and 9.
		The settings will infect to your setting in Speed Dial on WEB GUI.
		Set the number for performing Blind Call Transfer, where
	<phone-number> is the number that you wish to transfer the call
	to. It’s for SIP service only.
	Note: In Blind Call Transfer, you have a call in progress
	(incoming or outgoing) and decide you wish to transfer the call to
	another phone. To transfer the call, perform the following steps:
*90<phone-number>	1. Hook-flash to get a dial tone.
	2. Dial *90<phone-number> (e.g. *907401), there will be a
	confirmation tone then hang up. The other end will hear ring back
	and the called third-party phone will ring. When the third-party
	phone is picked up the two calls will be connected.
	If the third-party phone does not answer then the caller being
	transferred can hang up to cancel the connect attempt.

124

Chapter 4: Configuration