Bissell 20B4 Operations, Carpet cleaning continued, A. Set Custom Clean for the desired setting

Models: 20B4

1 72
Download 72 pages 2.15 Kb
Page 12
Image 12
A.Set Custom Clean for the desired setting.

Operations

Carpet cleaning continued

8c. Lift the bottom portion of the tank; pour out dirty water in the sink through the triangular shaped opening in the corner of the tank.

Note: You may notice hair & debris deposits on the carpet or in the tank that were loosened by the cleaning action. This debris should be picked up and thrown away.

8d. Fill the heavy duty bladder with clean hot tap water, following instructions 1c through 1e on page 10.

Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank. Always check the level of cleaning formula in the formula tank at the same time, and refill as needed.

Keep plenty of genuine BISSELL 2X formula on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and void the warranty.

8c.

9.Water rinse (optional). Rinsing is an option- al step that can be done during the clean- ing process or after the carpeted area has been completed. Switch to the water rinse setting, on the Custom Clean dial and follow the same path as you did for clean- ing. Take care to do a forward (wet) stroke by depressing the trigger, and a backward (wet) stroke, followed by a forward and backward (dry) stroke, releasing the trigger. Continue this until the water you see coming up the nozzle is clear. (see page 17.)

10.CleanShot. CleanShot is an optional fea- ture that can be used to fight tough stains. It can be used as either a tough stain pre-treat or can be used during the deep cleaning process itself. To use CleanShot either as a pre-treat or during deep cleaning, follow the instructions below.

A.Set Custom Clean for the desired setting.

B.Press the CleanShot button and aim the focused stream onto the stain. Allow the formula to soak in for 30 seconds.

C.Run the machine over the stain to extract. Repeat as needed until the stain is gone.

D.Rinse if desired.

8d.

10B.

9.

D.Rinse if desired.Clean Shot

12 w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Page 12
Image 12
Bissell 20B4 Operations, Carpet cleaning continued, A. Set Custom Clean for the desired setting, D. Rinse if desired