Bissell 20B4 warranty Operations, Special features, Built-in-heater feature, Assembly

Assembly

Your ProHeat 2X CleanShot comes in 1.

three, easy to assemble components:

Upper Handle

Lower Handle Tool Caddy

The only thing you will need to assemble your cleaner is a Phillips head screwdriver.

1.Slide upper handle onto lower handle.

2. Screw 3 screws into the marked holes. 3.

3.Place upper hose rack onto back of upper handle, and secure with screw.

4.Place lower hose rack onto back of upper handle by pushing in and sliding down until it snaps into place.

5.Snap tools into the tool caddy.

2.

4.

6. Wrap power cord and flex hose.

7.

7. Keep flex hose snugly in place by using the hose secure latch.

ProHeat 2X assembly is now complete.

Operations

Special features

Your BISSELL ProHeat 2X CleanShot deep cleaner is a home cleaning system that uses the power of heat, brushes and cleaning formula to get the deep down dirt for a maximum clean. Not only does it come with a lot of unique features, it has been designed with you, the customer, in mind.

Built-in-heater feature

BISSELL ProHeat 2X models all feature a patented built-in heater which will heat the hot tap water you put in up to 25 degrees hotter to safely optimize cleaning effectiveness. The heater will never allow the temperature to exceed 190 degrees. The heater switch on the front of the machine controls the heater so you have the option to turn off the heat if you are cleaning delicate wool or oriental rugs.

Hose Secure Latch

6 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1