Bissell 20B4 Custom Clean, CleanShot, Dry Aire select models only, 2-in-1 water tank, Operations

Operations

Custom Clean®

The Custom Clean feature automatically mixes hot tap water with the BISSELL for- mula. Simply choose one of the 4 settings (heavy traffic, normal clean, light clean, or water rinse) and the ProHeat 2X CleanShot will adjust the right amount of cleaning solution to mix with the heated water to fit your cleaning need.

CleanShot®

The CleanShot feature gives you the ability to tackle tough stains with the push of a button. Cleaning solution is sprayed in a concentrated stream, penetrating the stain and allowing for better cleaning focus. Simply spray and suction and the stain

is gone! CleanShot is especially effective for spots and stains that would other- wise take a lot of deep cleaning cycles to remove. It allows the cleaning formula and machine to do the work for you.

Dry Aire™ (select models only)

The Dry Aire system spreads hot air across the carpet to aid in drying. The feature runs while your machine is powered.

Flow indicator (select models only)

The flow indicator is located on the rear cover of your unit. When the unit runs out of water or solution the flow indica- tor will instantly let you know

2-in-1 water tank

Our 2-in-1 water tank full capacity system is designed with a heavy duty bladder inside for clean water. As you clean, the clean water in the bladder will empty and mix with the cleaning formula. Dirty water pulled out of your carpets will collect around the outside of the bladder so that clean and dirty water are always kept separate. This allows the user to only carry one tank to and from the sink for emptying and filling.

(located on upper handle)

Flow Indicator

CleanShot®

Dry Aire™

7

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1