Bissell 20B4 warranty Carpet cleaning, Operations, Do not boil or microwave water

Operations

Carpet cleaning 1.

1.Fill the 2-in-1 Water Tank. Remove the tank from the base of the machine by lifting up the tank carry handle. Carry like a bucket to the sink.

1a.	Unlatch the top of the tank from the
	bottom by lifting up on the tank latch
	located on the back of the tank.
1b.	Remove the top of the tank by lifting up	1b.
	on the handle.
	Note how the lip on the top tank
	separates from the groove in the
	bottom tank. This placement is
	important when putting the tank
	back together.
1c.	Fill the heavy duty bladder with clean
	hot tap water.
	*Do not boil or microwave water	1d.
	as it can destroy the bladder.
1d.	Leaving the filled bottom of the tank on
	a flat surface, only maneuver the top of
	the tank. To attach the top part of the
	tank to the bottom, carefully hook the lip
	on the top tank into the groove on the
	bottom tank.
1e.	Fasten tanks together by securing the
	latch in the back.	2.
	Note: Remember to secure the tank
	latch in the back and test to make

sure it is secure before picking up the tank.

2.Remove formula tank from back of machine.

3.Fill the formula tank by first unscrewing

the cap and insert. Always use genuine	4.
BISSELL 2X formulas to maximize clean-
ing and for the safety of your machine.
Fill with water to WATER line and then
fill up to FORMULA line with BISSELL 2X
Concentrated formula. Replace formula
tank.

4.Set Custom Clean Dial. Simply choose one of the 4 settings (heavy traffic, normal clean, light clean, or water rinse).

5.Set ReadyTools Dial to the floor cleaning setting.

1a.

1c.

1e.

3.

5.

10 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1