foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

DO NOT attempt to charge the battery pack with any chargers other than the ones in this manual. The charger and battery pack are specifically designed to work together.

These chargers are not intended for any uses other than charging designated Black & Decker rechargeable batteries. Any other uses may result in risk of fire, electric shock or electrocution.

Do not expose charger to rain or snow.

Pull by plug rather than cord when disconnecting charger. This will reduce risk of damage to electric plug and cord.

• Make sure that cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

• Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of fire, electric shock, or electrocution.

• An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that is 16 gauge has more capacity than 18 gauge. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size.

Do not place any object on top of charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source. The charger is ventilated through slots in the top and the bottom of the housing.

Do not mount charger on wall or permanently affix charger to any surface. The charger is intended to use on a flat, stable surface (i.e., table top, bench top).

Do not operate charger with damaged cord or plug — have them replaced immediately.

Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized service center.

Do not disassemble charger; take it to an authorized service center when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.

Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk.

NEVER attempt to connect 2 chargers together.

The charger is designed to operate on standard household electrical power (120 Volts). Do not attempt to use it on any other voltage.

SAVE THESE INSTRUCTIONS

Important Safety Instruction for Battery Packs

WARNING: For safe operation, read this manual and manuals originally supplied with tool before using the charger.

The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions below. Then follow charging procedures outlined.

Read all Instructions

Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when battery packs are burned.

Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the battery from the charger may ignite the dust or fumes.

If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte for Lithium-Ion batteries is composed of a mixture of liquid organic carbonates and lithium salts.

Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persist, seek medical attention.

WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame.

Charge the battery packs only in Black & Decker chargers.

DO NOT splash or immerse in water or other liquids. This may cause premature cell failure.

Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 105°F (40˚C) (such as outside sheds or metal buildings in summer). WARNING: Never attempt to open the battery pack for any reason. If battery pack case is cracked or damaged, do not insert into charger. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way (i.e., pierced with a nail, hit with a hammer, stepped on). Damaged battery packs should be returned to service center for recycling.

6

Page 98
Image 98
Black & Decker BDCD2204KIT instruction manual Important Safety Instruction for Battery Packs

BDCD2204KIT specifications

The Black & Decker BDCD2204KIT is a versatile and efficient cordless drill and screwdriver set designed for both amateur DIY enthusiasts and seasoned professionals. This all-in-one kit provides a practical solution for a variety of tasks, making it a valuable addition to any toolbox.

One of the standout features of the BDCD2204KIT is its 20-volt lithium-ion battery, which offers a powerful, long-lasting performance. The lithium-ion technology ensures that you won't experience the self-discharge issues seen with some older batteries, allowing you to store the drill for extended periods without losing charge. This means you can grab it and get to work at a moment's notice.

The drill is equipped with an impressive 11-position clutch, which provides precise control and reduces the risk of stripping screws or overdriving them. This feature is particularly valuable when working with different materials, from wood to metal, and allows for fine adjustments depending on the job at hand.

Additionally, the BDCD2204KIT boasts a compact design, making it easy to handle and maneuver in tight spaces. Weighing in at just over 3 pounds, this lightweight drill minimizes user fatigue, ensuring you can work for extended periods without discomfort. Its ergonomic handle enhances grip and comfort, providing better control during operation.

Another notable characteristic of this drill is its variable speed functionality, which allows for speeds up to 650 RPM. This gives users the flexibility to choose the optimal speed for their specific application, whether it be drilling, fastening, or removing screws. The built-in LED work light is a thoughtful addition, illuminating dark work areas and ensuring visibility for precise operation.

The BDCD2204KIT is not just a standalone tool; it comes complete with a set of accessories, including a variety of drill bits and screwdriver bits. This comprehensive kit eliminates the need for additional purchases and allows users to get started on projects right away.

In conclusion, the Black & Decker BDCD2204KIT is a robust, user-friendly, and multi-functional drill and screwdriver set that caters to diverse needs. With its efficient battery technology, precise control features, and lightweight design, it stands out as an essential tool for any handyman or DIY enthusiast, making projects easier and more accessible.