8
c. Move charger and battery pack to a location where the surrounding air
temperature is approximately 65°F - 75°F (18°- 24°C).
d. If charging problems persist, take the tool, battery pack and charger to your
local service center.
4. The battery pack should be recharged when it fails to produce sufficientpower on
jobs which were easily done previously.DO NOT CONTINUE to use under these
conditions. Follow the charging procedure. Youmay also charge a partially used pack
whenever you desire with no adverse affect on the battery pack.
5. Foreign materials of a conductive nature such as, but not limited to, steel wool,
aluminum foil, or any buildup of metallic particles should be kept away from charger
cavities.Always unplug the charger from the power supply when there is no battery
pack in the cavity.Unplug charger before attempting to clean.
6. Do not freeze or immerse charger in water or any other liquid.
WARNING:Shock hazard.Do not allow any liquid to get inside charger. Never
attemptto open the batterypack for any reason. If the plastichousing of the battery pack
breaksor cracks, returnto a service center for recycling.
SAFETY WARNINGSAND INSTRUCTIONS: DRILLS
1. Hold drill firmly with one hand on the grip and the other hand on the bottom of the
battery pack.
2. When attaching accessories in the drill chuck, hand tighten the keyless chuck firmly.
WARNING:Drill maystall (ifoverloaded orimproperlyused) causinga twist.Always
expectthe stall.Grip thedrill firmlywith bothhandsto controlthe twistingaction and
preventloss ofcontrol whichcould causepersonal injury.If astall doesoccur, release
thetrigger immediatelyand determinethe reasonforthestall before re-starting.
INSTALLINGAND REMOVING THE BATTERY PACK FROM THE TOOL
WARNING:Make certain the lock-offbutton is engaged to preventswitch actuation
beforeremoving or installingbattery.
TO INSTALLBATTERY PACK: Insert battery pack into
tool until an audible click is heard (figure B). Make
sure battery pack is fully seated and fully latched into
position.
TOREMOVE BATTERY PACK: Depress the battery
releasebutton as shown in figure C and pull battery
pack out of tool.
B
C