Black & Decker BDG3100-B3 Will not draw Spray wand not, Chemicals Low pressure Wand paragraph

OPERATIONAL	POSSIBLE CAUSE	SOLUTION
ISSUE
Will not draw	Spray wand not in	See How to Use Spray
chemicals	low pressure.	Wand paragraph in the
		Operation Section.
	Chemical filter clogged.	Clean filter.
	Chemical screen not	Make sure end of detergent
	in cleaning solution.	siphon hose is fully submerged
		into cleaning solution.
	Chemical too thick.	Dilute chemical. Chemical
		should be the same
		consistency as water.
	Pressure hose is too long	Lengthen water supply hose
		instead of high pressure hose.
	Chemical build up in	Please contact our customer
	chemical injector.	service department at
		www.BlackandDecker-la.com.
	Tank valve (R) in the	Make sure tank valve (R)
	CLOSED position.	is in the OPEN position.
No or low	Worn seal or packing	Please contact our customer
pressure		service department at
(after period of		www.BlackandDecker-la.com
normal use)	Worn or obstructed valves.	Please contact our customer
		service department at
		www.BlackandDecker-la.com.
	Worn unloader piston.	Please contact our customer
		service department at
		www.BlackandDecker-la.com.
Water leaking at	Worn or broken o-ring.	Check and replace.
gun/spray wand	Loose hose connection.	Tighten.
connection
Water leaking	Loose connections.	Tighten.
at pump	Piston packings worn.	Please contact our customer
		service department at
		www.BlackandDecker-la.com.
	Worn or broken o-rings.	Please contact our customer
		service department at
		www.BlackandDecker-la.com.
	Pump head or tubes	Please contact our customer
	damaged from freezing.	service department at
		www.BlackandDecker-la.com.
Pump Pulsates	Nozzle obstructed.	See Nozzle Cleaning
		paragraph in the
		Maintenance section for
		the correct procedure.

43-­ ENG