Black & Decker BDG3100-B3, BDG2600-B3 instruction manual Nozzle Spray Uses Surfaces Color Pattern

Models: BDG3100-B3 BDG2600-B3

1 44
Download 44 pages 19.03 Kb
Page 35
Image 35

NOZZLE

SPRAY

USES

SURFACES*

COLOR

PATTERN

 

 

 

powerful pinpoint

unpainted metal

 

 

for spot cleaning

or concrete;

Red

 

of hard, unpainted

DO NOT use on wood

 

 

surfaces or for

 

 

 

 

 

high reach areas

 

 

15˚

intense cleaning

grills, driveways, concrete

Yellow

 

of unpainted

or brick walkways,

 

hard surfaces

unpainted brick or stucco

 

 

 

40˚

cleaning of

auto/RV, marine, wood,

White

 

painted or delicate

painted brick and stucco,

 

surfaces

vinyl, painted siding

 

 

 

low pressure

applies cleaning

low pressure spray is

 

 

solutions

safe on all surfaces.

Black

 

 

Always verify

 

 

 

compatibility of cleaning

 

 

 

solution prior to use.

*NOTICE: The high pressure spray from your pressure washer is capable of causing damage to surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray.

HOW TO APPLY CHEMICALS/ CLEANING SOLVENTS (FIG. 7) Applying chemicals or cleaning solvents is a low pressure operation. NOTE: Use only soaps and chemicals designed for pressure washer use. Do not use bleach.

To Apply chemicals (BDG2600-B3):

1.Press detergent siphon hose (F) onto barbed fitting located near high pressure hose connection of pump as shown.

7

F

2.Place other end of detergent siphon hose with filter on it into container holding chemical/cleaning solution.

NOTE: For every 7 gallons of water pumped 1 gallon of chemical/ cleaning solution will be used.

3.Install low pressure (black) nozzle into quick connect fitting of spray wand, see How To Use Spray Wand paragraph in this section.

4.After use of chemicals, place detergent siphon hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly. If chemicals remain in the pump it could be damaged. Pumps damaged due to chemicals will not be covered under warranty.

NOTE: Chemicals and soaps will not siphon if the black soap nozzle is not installed on the spray wand.

35-­ ENG

Page 35
Image 35
Black & Decker BDG3100-B3 Nozzle Spray Uses Surfaces Color Pattern, Yellow Unpainted Or brick walkways Hard surfaces