Attaching a cleaning pad - Fig. D

Replacement cleaning pads are available from

 

your Black & Decker dealer (cat. no. SMP20).

D

Place a micro-fiber cleaning pad (6) on the

floor with the ‘hook & loop’ side facing up.

 

Raise the steam mop off the resting mat

 

 

(7) and press it down onto the cleaning pad

 

 

(6). You are now ready to steam clean and

 

 

sanitize your floor.

 

NOTICE: Always place the steam mop on

 

the resting mat (7) with the handle tube (4)

 

in the upright position when stationary and

 

make sure the steam mop is turned off when

 

not in use.

 

 

Removing a cleaning pad - Fig. E

CAUTION: Always wear suitable shoes E when changing the cleaning pad on your

steam mop. Do not wear slippers or open-toed footwear.

Return the handle tube (4) to the upright position and turn the steam mop ‘OFF’.

Place the steam mop on the resting mat and wait until it cools down. (approximately five minutes)

Place the front of your shoe onto the cleaning pad removal tab (14) and press down firmly.

Lift the steam mop up off the cleaning pad.

NOTICE: Always place the steam mop on

the resting mat (7) with the handle tube (4) in the upright position when stationary and make sure the steam mop is turned off when not in use.

Attaching the carpet glider - Fig. F

Place carpet glider on the floor.

 

F

Lightly press the steam mop with attached

 

cleaning pad down onto the carpet glider (8)

 

until it clicks into place.

 

NOTICE: Always place the steam mop on

 

the resting mat (7) with the handle (4) in the

 

upright position when stationary and make sure

 

the steam mop is turned off when not in use.

 

Removing the carpet glider

 

 

CAUTION: Always wear suitable shoes

 

when changing the carpet glider on your

 

steam mop. Do not wear slippers or open-toed footwear.

Return the handle to the upright position and turn the steam mop ‘OFF’.

Place the steam mop on the resting mat and wait until it cools down. (approximately five minutes)

Place the front of your shoe onto the carpet glider removal tab (15) and press down firmly.

Lift the steam mop up off the carpet glider.

NOTICE: Always place the steam mop on the resting mat (7) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use.

5

Page 5
Image 5
Black & Decker BDH1760SM Attaching a cleaning pad Fig. D, Removing a cleaning pad Fig. E, Removing the carpet glider