Black Box ACU3009A, ACU3001A, ACU3022A Local Unit User cable KV2505 or KV2515 plugs into User Card

CHAPTER 6: Installation

NOTES

If the switch is a ServSwitch Multi, keep these things in mind as you match the serial and audio cables/strands:

–The proper DB9 serial connector to use on its User Cable is the one without a yellow band.

–The audio cable from the Local Unit’s “Out” connector should be plugged into the blue-bandedaudio connector on the User Cable.

–The audio cable from the Local Unit’s “In” connector should be plugged into the audio connector without a blue band on the User Cable.

Also bear in mind that the microphone strand of the ServSwitch Multi User Cable (the one with the blue-bandedconnector) is mono only, so any stereo information that passes through this strand will be lost.

ServSwitch

Multi EXP

(KV160A-R2)

Included KVM- extension cable

Local Unit

User cable KV2505 or

KV2515 (plugs into

User Card)

(Serial and audio cables included with the KVM/Serial/Audio model)

Figure 6-4. Attaching a KVM switch with a single incompatible user-port

connector to the Local Unit’s CPU port.

35