Install the AC Power Adapter | Black Box LE172, LE075A-R2, LE072A

CHAPTER 3: Installation

3.5 Install the AC Power Adapter

If the SPC is not used, plug the AC power adapter cable into the small round socket at the back of the Modular Media Unit, as shown in Fig. 3-6. Plug the other end of the AC adapter cable into any standard electrical outlet. The red LED will then light up.

Fig. 3-6. Installing the AC Power Adapter.

11

Image 12

Black Box LE172, LE075A-R2, LE073AE-R2, LE074AE-R2, LE072A manual Install the AC Power Adapter, Installing the AC Power Adapter

Contents

Modular Parallel Adapters Modular Media Units FCC Statement Contents Specifications Introduction Available ModelsBNC AUI Features Illustrates a typical adapter and media unit Installation Attach the Media Unit Connect the Network Cable 1 LE071A and LE073A Connecting an RG-58/U Coaxial Cable to the Media Unit 2 LE072A and LE074A Connecting an AUI Cable to the Media Unit 3 LE075A Install the Self-Powering Cable SPC Plug the Ethernet Adapter into the Computer Install the AC Power Adapter Installing the AC Power Adapter Software Setup and Operation Supplied FilesDOS ODI Driver for Novell NetWare \ETHERNET\POCKET\ EPP Frame ETHERNET802.2 Disablelink Link Driver Setodi Polling Unidir Enabled Microsoft LAN ManagerLSL Setodi Ipxodi Netx EPP Disablelink Modadpt Adapter DRIVERNAME=SETNDIS$ Polling Unidir Microsoft Windows for Workgroups LANtastic/Al version 5.x Driver DRIVERNAME=SETNDIS$ Packet Driver HELP, XEROX, IEEE, MPXShare Server Modular Parallel Adapters and Modular Media Units Self-Test and Diagnostics Diagnostics LPT Report Error Messages Modadpt Ethernet Adapter is not connected or not poweredAdapter failed to initialize correctly Modadpt Ethernet Adapter Memory RAM failure Customer Service Information Copyright 1996. Black Box Corporation. All rights reserved